By Anna Lockhart. Is your standing seam roof designed ...
By Miguel Jacinto, Renoworks. Save valuable time with construction estimating ...
Read More
Sherwin-Williams - Sidebar Ad - MetalVue Ad - August 2022
McElroy Metals - Sidebar Ad - May 2022
Vicwest - Sidebar Ad - New Bellara Ad
R-Club Peer Forum - Operations with John Kenney - Q4 - Sidebar
METALCON - Sidebar Ad - Expo
RPS - Sidebar Ad - Giveaway
METALCON Coffee Conversations!

Case Study - Snow Guards Let Red Rocks Live up to Their Promise of Rain or Shine Performances

S-5! Red Rocks
October 10, 2022 at 9:00 a.m.

By S-5!® 

S-5! helps the show go on at iconic venue in Colorado by protecting hallowed stage with snow retention system. 

West of Denver and nestled in the foothills of the Rocky Mountains is one of the most iconic music venues in the country: Red Rocks. Named after the huge sandstone monoliths that shoot from the ground, creating the only naturally occurring, acoustically perfect amphitheater in the world. 

Red Rocks is among Colorado’s most celebrated landmarks. The park’s history dates back to 1928, when the City of Denver acquired the land and used federal agencies like Civilian Conservation Corps (CCC) to build out seating and a simple stage so it could become a performance space. Red Rocks has attracted some of the world’s most notable performers, from the legendary “C/W Outlaws,” Sting and The Beatles to opera stars and U2. A combination of community park and performance venue, Red Rocks is a celebrated great example of how public land can be transformed into the ultimate landmark and a fantastic gathering place.    

The project initially required the removal of 25,000 cubic yards of rock and dirt and used 90,000 square feet of flagstone, 10 carloads of cement, 800 tons of quarried stone and 30,000 pounds of reinforced steel. Known as the only naturally occurring, acoustically perfect amphitheater in the world, many improvements to the venue have been made over the years. In 2021, the city was looking to expand and upgrade the venue with a larger roofing structure over the main performance stage. An 8,500 square foot Nordic Brown Copper standing seam metal roof was installed to replace the original one. The roof’s high-end copper was shipped from German supplier, Aurubis in coils and fabricated on site. Mounted to the venue’s stunning new roof is the complete DualGard™ snow retention system by S-5! 

The challenge 

The new roof sits between 75 and 100 feet above the stage floor. Without a snow retention system, snowpack and ice could easily escape endangering performers, concertgoers and expensive equipment. 

Due to the high elevation of the site, extreme weather conditions ranged from freezing rain and snow to warm, dry, and sunny, then back to winter-like conditions throughout the duration of the project. Such weather conditions would also be a concern for the venue once construction was complete and business as usual resumed, therefore a high-quality, long-lasting snow retention system was necessary to prevent melting snow and ice from sliding off the sloped metal roof. 

The terrain and mountainous setting of the venue, with long lines of stairs and curvy rocks, presented its own set of challenges. Construction staging areas were limited, and it was difficult to maneuver equipment and material. A crane was required to hoist roofing materials over a wall and around the mountain. 

Furthermore, the venue is a designated historical site, requiring a tested, trusted and engineered solution that was aesthetically pleasing and would meet the architectural requirements and specifications for the project. 

The solution 

Because the roof is subject to both the downward and upward forces of snow and wind, it required a snow retention system designed to resist stresses in two directions. The DualGard snow retention system by S-5! was custom-engineered for the standing seam roof profile. 

Custom powder-coated to match the roof, DualGard is a complete, two-pipe aluminum, snow guard system with strength, testing and quality for almost any standing seam profile so the team was able to accomplish perfect color matching to the copper roof — meeting the architectural requirements for this historical site. 

Additionally, the DualGard was easy to transport to such a challenging setting. It is compact and comes in packaging lengths and weights that are 100% UPS-able and easy to handle on site. 

Project team 

Architect for roof replacement: Short Elliott Hendrickson 

Structural engineer: Martin & Martin 

Electrical engineer: CMO Consulting Engineer, LLC 

General contractor: GH Phipps 

Roofing contractor: Superior Roofing, Inc. 

S-5! supplier: Schafer and Company 

Roof profile: Aurubis Nordic Brown Copper standing seam metal roof 

Industry: Municipal 

Project stats 

Roof measured: 8500 square feet 

Roof pitch: Center, 1/12; Sides, ½ /12 

Building height (stage level to top of roof): 51’ (lowest edge), 75’+ (highest edge) 

Products supplied: 

  • Dual Gard (200 feet) 
  • DualBracket (150) 
  • S-5-U Mini clamp (300) 

Learn more about S-5! in their directory or visit www.S-5.com

Original article source: S-5!  

Recommended For You


There are currently no comments here.

Leave a Reply

Commenting is only accessible to RCS users.

Have an account? Login to leave a comment!

Sign In
Watts Removal Products  - Banner Ad - MCS -June 2022


By Anna Lockhart. Is your standing seam roof designed ...
By Miguel Jacinto, Renoworks. Save valuable time with construction estimating ...
Read More
RCS  - Sidebar Ad - 2023 Trends Survey Sponsored by Beacon
Fortified by IBHS - Join FORTIFIED Network - Sidebar
Franklin International - Sidebar Ad - New Metal Roof Sealant
Metal-Era / Hickman - Sidebar Ad - Product Launch
S-5! - S-5! University
Xipre - Sidebar Ad - Transluscent Solutions